Since its release, the e-Level™ Controller has become the industry favorite for accuracy, reliability, and ease-of-use. It offers the ability to save 3 unique heights into memory at the touch of a button using TruPosition™ height sensors installed in each corner of your suspension. The key to this technology is its RideMonitor™ Mode; while parked or driving, the system will maintain the vehicle height when loading or unloading passengers or when road conditions change. All of this automatic intelligence is unnoticed by the driver, providing improved ride quality and handling characteristics for any vehicle with Air Suspension. Each system calibrates to the vehicle upon installation and then learns how your Air Suspension behaves over time. This flexibility allows the e-Level Controller to be used on ANY vehicle and requires NO user tuning.
- THREE PROGRAMMABLE HEIGHTS: Lowered / Ride Height / Raised, plus the all down function.
- RIDEMONITOR MODE: Adjust air springs as needed while driving or parked.
- TRUPOSITION HEIGHT SENSORS: Provide accurate leveling regardless of load.
- RIDE HEIGHT ON START: Gets you ready to drive once you turn the key.
- ANTI-CROSS LOADING: Height management gives balanced spring weights.
- AUTOMATIC CALIBRATION: To any air suspension on any vehicle. No user programming required.
- STRAIGHT TO HEIGHT: Adjustment methods avoid valve "pulsing" and gets you ready to drive immediately.
- MANAGES AIR COMPRESSORS: For faster height recovery and low voltage protection.
- PLUG-N-PLAY: Wiring harness for easy installation.
THREE PROGRAMMABLE HEIGHTS LOWERED / RIDE HEIGHT / RAISED, PLUS ALL DOWN
When mounting space and cost are paramount, the Rocker Switch Interface is a simple, yet effective solution. The primary function of the Rocker Switch is to access your three saved heights pressing UP or DOWN to raise or lower between saved heights (current vehicle height is indicated by red and green LED lit arrows). A small program button (usually hidden under the dash) allows you toggle through functions like manual control over each air spring individually, manual control over front and rear air springs in "pairs", Re-Saving each of your heights, and adjusting system preferences.
RIDEMONITOR MODE ADJUSTS AS NEEDED WHILE DRIVING OR PARKED
AccuAir's e-Level™ Controller with RideMonitor™ Mode is the result of 3 years of development and testing. The proprietary RideMonitor™ Mode will constantly monitor the height of all 4-corners of the vehicle. While parked, if it determines that any corner of the vehicle is outside of a given tolerance (high or low) for more than 5 seconds, it will provide a precision correction to get the corner (or corners) back to the target height. While driving, the vehicle must be out of tolerance for more than 45 seconds before a correction will be made. Extensive algorithms are embedded to avoid unnecessary corrections while driving by detecting transient driving scenarios like stopping, turning, and accelerating. All of this results in a vehicle that is always within height specification which results in improved ride quality, consistent tire wear, and consistent handling characteristics.
TRUPOSITION HEIGHT SENSORS PROVIDE ACCURATE LEVELING
The e-Level™ Controller uses TruPosition™ height sensors and will provide adjustment accuracies of better than 1/8" at the wheels as well as compensate for changing vehicle loads by adding the amount of air necessary to obtain the target vehicle height.
100% PLUG-N-PLAY HARNESS
High quality weather-proof plug-n-play harnesses make for fast and accurate wire connections that will last in the harsh under-vehicle environment. All harnesses get 100% tested prior to shipment to assure proper operation in the field.