The SwitchSpeed™ Controller offers all of the standard functions that
you’ve come to expect from a traditional switchbox, but that is where
the similarities stop. AccuAir’s proprietary Advanced
Burst-Control-Technology™ allows you to choose between three different
modes of adjustment; Precise / Moderate / Full Speed. The burst speeds
for each of these modes are user-tunable to achieve improved precision
from even the largest valves on the market. Although the SwitchSpeed™
does not offer preset heights like the e-Level™ controller; it can
easily be upgraded to the e-Level™ system down the road.
• Manual Control of each individual air spring along with front / rear paired adjustments.
• 3 User-Programmable Valve Adjustment Speeds
Precise / Moderate / Full. *INDUSTRY FIRST*
• Advanced Burst-Control Technology™ precise control over any valve. *INDUSTRY FIRST*
• Optional Air Compressor / Air Tank Pressure Management
Upgrade gives you three optional tank pressures (150 /175 /
200 psi) for more reliable air compressor management. It also
monitors vehicle voltage and automatically turns the compressor(s) OFF at 10.5 volts to prevent a dead battery. *INDUSTRY FIRST*
• “All-Down” Function can be programmed as a momentary
“pancake” or as a timer-based all-down function.
• 100% Weather Tolerant for under vehicle mounting.
• Plug-n-Play wiring harnesses for ease of installation.
• Each System is 100% Factory Tested.
The VU4 4-Corner Valve Unit is engineered to provide the cleanest installation and most reliable operation on the market. This electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has built-in push-to-connect 3/8” D.O.T. approved air fittings for all of it’s plumbing connections. The robust internal solenoid valve architecture maximizes flow rates, provides bubble-tight sealing, and guarantees operation up to 200 psi for millions of cycles. All of this technology is housed in a unique enclosure design which routes each of the solenoid wires to a single weatherproof connector, eliminating typically loose wires. This not only improves the appearance, but it also guarantees proper operation for every installation. With an overall size of only 5”x 3”x 3” and the ability to survive harsh under vehicle environments, this product is ideal for any application.
• For use with e-Level™ Controller or any other brand of controller or switches.
• Pre-wired & Port Numbered for reduced installation time.
• 3/8" Press-Fit D.O.T. fittings eliminate pipe threads for 100% leak free operation.
• High Pressure Rated for operation up to 200 psi.
• Dual Inlet & Exhaust ports for maximum flow (Plug extra inlet if not required).
• Compact Layout for minimal space usage (5”x 3”x 3”).
• Anodized Aluminum Manifold to prevent corrosion.
• 100% Weather Resistant for harsh under vehicle environments.