We understand you have many options to
lower your BMW, but everything falls short of the versatility of air
spring suspension. Sure, coil springs will get you low and improve your
handling, but do you want to deal with the lumber-wagon-type ride?
Coilovers are cool, but who wants to use a wrench in order to lower your
car for the ultimate killer stance? With air springs, the push of a
button lets you raise your ride to clear speed bumps and cumbersome
steep driveways, with no worry of scraping your undercarriage. Best of
all, the ride quality is unbeatable—you are literally riding on air!
Up front, we start with our monotube,
threaded body strut, partnered with our smooth-riding, double-bellow
air spring. Not only can you change the height of the car by increasing
or decreasing air pressure, but since the strut body is threaded, you
can change the height of the strut simply by spinning the lower mount up
or down. To add even more adjustability, these struts have 30
different levels of damping so you can go from a smooth street ride to
race-car-like stiffness with the twist of a knob. To top it all off, we
include adjustable caster/camber plates, made out of T6061 aluminum and
anodized red, for a show-stopping appearance and excellent race track
For the rear, we replace the coil
spring with a double-bellow air spring to compliment the front for the
ultimate in ride quality. We also swap out the rear shock—a threaded
body monotube shock, which also has 30 levels of damping
adjustability—for your tuning pleasure.
Installation is simple with our detailed instruction manuals; if you have the skill to
wire a stereo or swap suspension components, you can have your car on
the ground or tearing up your favorite road course in a matter of
hours. Only basic hand tools are necessary to complete the job.
Take a look at what's included:
Lift Performance bolt on front and rear High Performance air struts-
threaded shock bodies for fine-tuning ride height, 30 way adjustable
damping, and anodized aluminum brackets
-AccuAir VU4 4 Way Valve Manifold- Compact design, easy installation, four corner independent control
-Viair 380C Chrome Air Compressor Dual Pack - includes two 200 psi chrome air compressors, relays, pressure switch, and more
-5 gallon ALUMINUM air tank- perfect size for your ride, aluminum won't
corrode or rust. Mounting feet on bottom for easy installation in your trunk.
-50' roll of 3/8" DOT approved air line
-Brass DOT approved PUSH-CONNECT air fittings- no leaks or
failures with these quality parts! Watch out for inferior kits looking
to save a buck by sending you plastic non-DOT fittings!!
-AVS 7 Switch Box - prewired handheld box for easy installation and clean compact controls
Our LEVEL 3 kit builds upon LEVEL 2
specs, but upgrades the individual air valves for an AccuAir VU4
manifold valve for a simpler and more compact installation with less
plumbing and wiring.
include complete installation guides for the installation of the
airbags, as well as plumbing and wiring diagrams to make things as
painless as possible. Feel free to ask any questions about putting this kit
in and we'll be happy to assist! We love
hearing from our customers and seeing their projects come together.
AccuAir ENDO-VT Upgrade: Upgrading to the ENDO-VT will exchange the VU4 valve manifold, and the seamless aluminum air tank for a 5 gallon ENDO-VT valve tank. Comes in raw aluminum finish.
BCFab Airbox Upgrade: This will exchange the AVS wired switchbox for the wireless BCFab Airbox.