We have created the
perfect suspension kit to tear up a racetrack, shred some back country
roads, or to stop people dead in their tracks at a show. As the leader
in aftermarket high-performance air suspension, we know what it takes to
balance your ride perfectly, maximize handling capability, and maintain
your ride’s stunning good looks.
So, what does it take to have such a
versatile suspension system? It all starts with a strong foundation; in
this case, that’s the struts. Air Lift Performance uses 30-way adjustable, monotube
struts (with a serious range of damping adjustment) that have been
specially tuned to match the air springs. Monotube construction is the
preferred choice in racing, and for us as well, considering its
sensitivity to small inputs as well as its great ability to shed heat
when pushed to the limit. The 30 clicks of adjustment aren’t just for
fun, but allow users to dial in their preferred handling feel or desired
ride quality. The range goes from super-stiff to exceptionally soft,
adjusting rebound and compression together. The struts weigh
considerably less than the coil spring parts you remove, reducing
unsprung weight—a benefit to both ride control and handling.
Another notable feature is the presence
of adjustable camber plates in front. This allows easy, precise
adjustment of the camber angle, making quick work of the alignment
process for road or track. These plates are packed with high-quality,
Japanese-manufactured pillow ball bearings for long life and low noise.
What sets these struts way apart from the
coilover crowd is the addition of our adjustable, progressive-rate air
springs. These high-rate springs create a stable platform for
aggressive track driving, while providing a level of comfort not
typically found with lowered suspensions. By using this progressive
nature of air springs and maximizing available suspension travel, we are
able to ride low without the punishing ride…and since they allow ride
height to be adjusted with a button, no longer do you have to suffer the
curses of static suspension lowness! No more issues with scraping
against speed bumps or steeply angled drives. Raise it up as high as
stock to ride off-road without damaging the underbody.
Having good components in a kit is
important, but it’s just as critical to make sure they work together to
give the desired result. Extensive testing at various racetracks has
proven to be important in creating the proper handling balance, as well
as illustrating the toughness and durability of the parts.
Worried about installation? Every kit
comes with a detailed instruction manual to guide you through all the
steps. If you can install suspension and wire a stereo, you have the
skills necessary for the job. And if you have questions, our customer service department will take good care of you.
Take a look at what's included:
-Air Lift Performance bolt on front and rear High Performance air struts- threaded shock bodies for fine-tuning ride height, 30 way adjustable damping, and anodized aluminum brackets
-Stainless Steel Control Panel w/ 2 Dual Needle Gauges & 4 Manual Control Valves- Compact design, easy installation, four corner independent control
-Viair 480C Chrome Air Compressor - includes 200 psi chrome air compressor, relay, pressure switch, and more
-5 gallon ALUMINUM air tank- perfect size for your ride, aluminum won't
corrode or rust. Mounting feet on bottom for easy installation in your trunk.
-100' roll of 1/4" DOT approved air line
-Brass DOT approved PUSH-CONNECT air fittings- no leaks or
failures with these quality parts! Watch out for inferior kits looking
to save a buck by sending you plastic non-DOT fittings!!
system is designed for simplicity over speed- the manual valves will
lift or lower your ride in around 7-8 seconds. If you're looking for
something faster, we have electric systems available as well, but this
kit is designed for people that want to set their height and cruise!
This is our "LEVEL 1" kit, but it doesn't sacrifice quality or
reliability to save you money!We
include complete installation guides for the installation of the
airbags, as well as plumbing and wiring diagrams to make things as
painless as possible. Feel free to ask any questions about putting this kit
in and we'll be happy to assist! We love
hearing from our customers and seeing their projects come together.